Home > News > Technical Article > How to properly mate (pair) connector jacks 1.0, 1.5 and copper pins
Nov.2023 07
Views: 180
How to properly mate (pair) connector jacks 1.0, 1.5 and copper pins
Details
Connector jack 1.0, 1.0 connector jack, connector jack 1.0, 1.5 and copper pins how to plug (match) connector jack models 1.0, 1.0mm, 1.5mm, 0.8, 2.0mm, 3.0 mm board to board, wire to board connection, customized according to customer length and outer diameter. It is tightly assembled with the plastic shell, or the connector jack 1.0, 1.5mm is directly injection molded. The material is marked with brass H59-1, H62 brass, Hongchangcheng straight bar brass H59-1 material, copper needle diameter 4mm, 5mm, 6mm, 7mm, 8mm, 9mm11mm processing form; usually lathe and CNC processing,. After molding, secondary processing is involved. After machining and secondary processing, it is an important compression port, which can smoothly and tightly connect with the 1.0, 1.2, and 1.5 male pins. The surface treatment is gold-plated or silver-plated 10U. During secondary processing, there should be no burrs on the inner wall, otherwise the pins will be scratched and severely worn. Therefore, after the copper jack of the connector is processed and formed, it is necessary to deburr the fine seams. The deburring efficiency is difficult to meet the rapidly growing market demand. So let’s take a look today at this kind of fine seam deburring. The first thing that can be made clear is that it is possible to use abrasive flow to remove fine seams. The soft abrasive is squeezed in from the main hole and squeezed out from the small seam. , the abrasive is mainly composed of silicon carbide powder, which has strong cutting force. During the extrusion process, the burrs are ground away through the friction of the abrasive. Due to cost considerations, the burrs are left particularly large, which will extend the processing time and affect accuracy during the abrasive flow removal process. Shenzhen Hongchangcheng electronic connector pins and jacks can also meet the accuracy and speed requirements. In new new energy, electronic medical, PCB copper pins and copper hole connection control boards, it has many years of experience in formulating new models to improve quality and reduce costs.